AD&D 2nd Edition

Everything I have for Second Edition

Category Archives: Arcane Magic


Glassee

Range: Touch
Components: V, S, M
Duration: 1 rd/level
Casting Time: 1 rd
Area of Effect: Special
Saving Throw: None

By means of this spell, the wizard is able to make a section of metal, stone, or wood as transparent as glass to his gaze, or even make it into transparent material as explained hereafter. Normally, the glassee spell can make up to 4 inches of metal, 6 inches of stone, and 20 inches of wood transparent. The spell will not work on lead, gold, or platinum. The wizard can opt to make the glassee work only for himself for the duration of the spell, or he can actually make a transparent area, a one-way window, in the material affected. Either case gives a viewing area 3 feet wide by 2 feet high. If a window is created, it has the strength of the original material. The material component of the spell is a small piece of crystal or glass.

Geas

Range: 10 yards
Components: V
Duration: Special
Casting Time: 4
Area of Effect: 1 creature
Saving Throw: None

A geas spell places a magical command upon a creature (usually human or humanoid) to carry out some service, or to refrain from some action or course of activity, as desired by the spellcaster. The creature must be intelligent, conscious, under its own volition, and able to understand the caster. While a geas cannot compel a creature to kill itself or perform acts that are likely to result in certain death, it can cause almost any other course of action. The geased creature must follow the given instructions until the geas is completed. Failure to do so will cause the creature to grow sick and die within 1d4 weeks. Deviation from or twisting of the instructions causes a corresponding loss of Strength points until the deviation ceases. A geas can be done away with by a wish spell, but a dispel magic or remove curse spell will not negate it. Your DM will decide any additional details of a geas, for its casting and fulfillment are tricky, and an improperly cast geas is ignored.

Eyebite

Range: 20 yards
Components: V, S
Duration: 1 round/3 levels
Casting Time: 6
Area of Effect: 1 creature
Saving Throw: Special

An eyebite spell enables the caster to merely meet the gaze of a creature and speak a single word to cause an effect. This gaze attack is in addition to any other attacks allowed to the wizard. The wizard selects one of four possible gaze attacks at the time the spell is cast, and this attack cannot be changed. For example, a 12th level caster who chose fear would have four opportunities to make gaze attacks causing fear, one for each round of the spell’s duration. Any gaze attack is negated by a successful saving throw vs. spell, with Wisdom adjustments. The four effects of the spell are as follows: Charm: The wizard can charm a single person or monster by gaze and by uttering a single word. The effect is to make the charmed subject absolutely loyal and docile to the caster, even to the point of personal danger. It is otherwise the same as a charm monster spell. All creatures other than humans, demihumans, and humanoids save with +2 bonuses. Fear: The wizard can cause fear by gaze and by speaking a single word. The subject flees in blind terror for 1d4 rounds. After this, the creature refuses to face the caster and cowers or bolts for the nearest cover if subsequently confronted by the caster (50% chance of either). The latter effect lasts one turn per caster level. This attack can be negated by spells that counter fear. Sicken: This power enables the caster to merely gaze, speak, a word, and cause sudden pain and fever to sweep over the subject’s body. Creatures with ability scores function at half effectiveness; others inflict only one-half damage with physical attacks. Movement is at one half normal rate. The subject remains stricken for one turn per level of the caster, after which all abilities return at the rate of one point per turn of complete rest or one point per hour of moderate activity. The effects cannot be negated by a cure disease or heal spell, but a remove curse or successful dispel magic spell is effective. Creatures other than humans, demihumans, and humanoids save with +2 bonuses verses this attack. Sleep: The wizard can cause any individual to fall into a comatose slumber by means of a gaze and a single word, unless the subject successfully rolls its saving throw vs. spell. Creatures normally subject to a 1st level sleep spell save with -2 penalties. An affected creature must be shaken or otherwise shocked back to consciousness. In all cases, the gaze attack has a speed factor of 1. This spell does not affect undead of any type, or extend beyond the plane occupied by the caster. Note that the caster is subject to the effects of his reflected gaze and is allowed any applicable saving throw. In the case of a reflected charm gaze, the caster is paralyzed until it wears off or is countered.

Extension III

Range: 0
Components: V
Duration:
Special
Casting Time:
6
Area of Effect:
Special
Saving Throw: None

This spell is the same as the 4th level extension I spell, except that it will extend 1st through 3rd level spells to double duration and will extend the duration of 4th or 5th level spells by 50%.

Ensnarement

Range: 10 yards
Components: V, S, M
Duration: Special
Casting Time: 1 turn
Area of Effect: Special
Saving Throw: Neg.

Casting this spell attempts a dangerous act: to lure a powerful creature from another plane to a specifically prepared trap, where it will be held until it agrees to perform one service in return for freedom from the ensnarement spell. The type of creature to be ensnared must be known and stated, and if it has a specific, proper, or given name, this must be used in casting the ensnarement spell. The spell causes an awareness of a gatelike opening on the plane of the creature to be ensnared. A special saving throw is then made to determine if the creature detects the nature of the planar opening as a trap or believes it to be a gate. To save, the creature must roll equal to or less than its Intelligence score on 1d20. The score is modified by the difference between the creature’s Intelligence and that of the spellcaster. If the creature has a higher score, the difference is subtracted from its dice roll to save. If the spellcaster has a higher score, the difference is added to the dice roll. If the saving throw succeeds, the creature ignores the spell-created opening, and the spell fails. If the saving throw fails, the creature steps into the opening and is ensnared. When so trapped, the other planar creature can freely attack the ensnaring wizard, unless the caster has created a warding circle. Such circles may be temporary (drawn by hand) or permanent (inlaid or carved). Even with such protection, the entrapped creature may break free and wreak its vengeance upon the spellcaster. A hand-drawn circle has a base failure chance of 20%, while one inlaid or carved has a base of 10% (and that is for the first time it is used, to determine whether or not the job was done properly). The base chance is modified by the difference between the wizard’s combined Intelligence and experience level and the Intelligence and the experience level or Hit Dice of the creature ensnared. If the spellcaster has a higher total, that difference in percentage points is subtracted from the chance for the creature to break free. If the creature has a higher total, that difference is added to its chance to break free. The chance can be further reduced by careful preparation of the circle. If the hand-made circle is drawn over a longer period of time, using specially prepared pigments (1,000 gp value per turn spent drawing), the chance of breaking free is reduced by 1% for every turn spent in preparation. This can bring the base chance to 0%. Similarly, an inlaid or carved design can be brought to a 0% chance of the creature breaking free by inlaying with various metals, minerals, etc. This cost will require a minimum of one full month of time and add not less than 50,000 gp to the basic cost of having the circle inlaid or carved into stone. Any break in the circle spoils the efficacy of the spell and enables the creature to break free automatically. Even a straw dropped across the line of a magic circle destroys its power. Fortunately, the creature within cannot so much as place a straw upon any portion of the inscribed ward, for the magic of the barrier absolutely prevents it. Once safely ensnared, the creature can be kept for as long as the spellcaster dares. (Remember the danger of something breaking the ward!) The creature cannot leave the circle, nor can any of its attacks or powers penetrate the barrier. The caster can offer bribes, use promises, or make threats in order to exact one service from the captive creature. The DM will then assign a value to what the wizard has said to the ensnared creature, rating it from 0 to 6 (with 6 being the most persuasive). This rating is then subtracted from the Intelligence score of the creature. If the creature rolls a successful Intelligence check against its adjusted Intelligence, it refuses service. New offers, bribes, etc., can be made, or the old ones re-offered 24 hours later, when the creature’s Intelligence has dropped by 1 point due to confinement. This can be repeated until the creature promises to serve, until it breaks free, or until the caster decides to get rid of it by means of some riddance spell. Impossible demands or unreasonable commands are never agreed to . Once the single service is complete, the creature need only so inform the spellcaster to be instantly sent from whence it came. The creature might later seek revenge.

Enchant an Item

Range: Touch
Components: V, S, M
Duration: Special
Casting Time: Special
Area of Effect: 1 item
Saving Throw: Neg.

This is a spell that must be used by a wizard planning to create a magical item. The enchant an item spell prepares the object to accept the magic. The item must meet the following tests: l) it must be in sound and undamaged condition; 2) the item must be the finest possible, considering its nature, i.e., crafted of the highest quality material and with the finest workmanship; and 3) its cost or value must reflect the second test, and in most cases the item must have a raw-materials cost in excess of 100 gp. With respect to requirement 3, it is not possible to apply this test to items such as ropes, leather goods, cloth, and pottery not normally embroidered, bejeweled, tooled, carved, or engraved. If such work or materials can be added to an item without weakening or harming its normal functions, however, these are required for the item to be enchanted. The wizard must have access to a workshop or laboratory, properly equipped and from which contaminating magic can be screened. Any magical item not related to the fabrication process (such as most protective devices) and within 30 feet of the materials is a source of contaminating magic and will spoil the process. The item to be prepared must be touched by the spellcaster. This touching must be constant and continual during the casting time, which is a base 16 hours plus an additional 8d8 hours (as the wizard may never work more than 8 hours per day, and haste or any other spells will not alter the time required in any way, this effectively means that casting time for this spell is 2 days + 1d8 days). All work must be uninterrupted, and during rest periods the item being enchanted must never be more than 1 foot distant from the spellcaster; if it is, the whole spell is sp0oiled and must be begun again. (Note that during rest periods absolutely no other form of magic can be performed, and the wizard must remain quiet and in isolation or the enchantment is ruined). At the end of the spell, the caster will know that the item is ready for the final test. He will then pronounce the final magical syllable, and if the item makes a saving throw (which is exactly the same as that of the wizard) vs. spell, the spell is completed. The spellcaster’s saving throw bonuses also apply to the item, up to +3. A result of 1 on the 1d20 roll always results in failure, regardless of modifications. Once the spell is finished, the wizard can begin to place the desired spell upon the item. The spell he plans to place must be cast within 24 hours or the preparatory spell fades, and the item must be enchanted again. Each spell subsequently cast upon an object bearing an enchant an item spell requires 2d4 hours per spell level of the magic being cast. Again, during casting the item must be touched by the wizard, and during the rest periods it must always be within 1 foot of his person. This procedure holds true for any additional spells placed upon the item, and each successive spell must be begun within 24 hours of the last, even if the prior spell failed. No magic placed on an item is permanent unless a permanency spell is used as a finishing touch. This always runs a 5% risk of draining 1 point of Constitution from the wizard casting the spell. Also, while it is possible to tell when the basic spell (enchant an item) succeeds, it is not possible to tell if successive castings actually work, for each must make the same sort of saving throw as the item itself made. Naturally, an item that is charged-a rod, staff, wand, javelin of lightning, ring of wishes, etc.-can never be made permanent. Magical devices cannot be used to enchant an item or cast magic upon an object so prepared, but scrolls can be used for this purpose. The materials needed for this spell vary according to both the nature of the item being enchanted and the magic to be cast upon it. For example, a cloak of displacement might require the hides of one or more displace beasts, a sword meant to slay dragons could require the blood and some other part of the type(s) of dragon(s) it will be effective against, and a ring of shooting stars might require pieces of meteorites and the horn of ki-rin. These specifics, as well as other information pertaining to this spell, are decided by the DM and must be discovered or researched in play.

Disintegrate

Range: 5 yards/level
Components: V, S, M
Duration: Instantaneous
Casting Time: 6
Area of Effect: 1 creature or 10 x 10 x 10 ft cube
Saving Throw: Neg.

This spell causes matter to vanish. It affects even matter (or energy) of a magical nature, such as Bigby’s forceful hand, but not a globe of invulnerability or an antimagic shell. Disintegration is instantaneous, and its effects are permanent. Any single creature can be affected, even undead. Nonliving matter, up to a 10 foot x 10 foot x 10 foot cube, can be obliterated by the spell. The spell creates a thin, green ray that causes physical material touched to glow and vanish, leaving traces of fine dust. Creatures that successfully save vs. spell have avoided the ray (material items have resisted the magic) and are not affected. Only the first creature or object struck can be affected. The material components are a lodestone and a pinch of dust.

Demishadow Magic

Range: 60 yards + 10 yards/level
Components: V, S
Duration: Special
Casting Time: 6
Area of Effect: Special
Saving Throw: Special

This spell is similar to the 5th level shadow magic spell, but this spell enables the casting of partially real 4th and 5th level evocations (cone of cold, wall of fire, wall of ice, cloudkill, etc). If recognized as demishadow magic (if a saving throw vs. spell is successful), damaging spells inflict only 40% of normal damage, with a minimum of 2 points per die of damage. A demishadow magic cloudkill slays creatures with fewer than 2 Hit Dice and inflicts 1d2 points of damage per round.

Death Spell

Range: 10 yards/level
Components: V, S, M
Duration: Instantaneous
Casting Time: 6
Area of Effect: 30 ft cube/level
Saving Throw: None

When a death spell is cast, it snuffs out the life forces of creatures in the area of effect instantly and irrevocably. Such creatures cannot be raised or resurrected, but an individual slain in this manner might be brought back via a wish. The number of creatures that can be slain is a function of their Hit Dice.

Maximum # of Creature’s Hit Dice      Creatures Affected
Under 2 4d20
2 to 4 2d20
4+1 to 6+3 2d4
6+4 to 8+3 1d4

If creatures of differing Hit Dice are attacked with a death spell, roll the dice (4d20) to determine how many creatures of under 2 Hit Dice are affected. If the number rolled is greater than the actual number of sub-2 Hit Dice creatures, apply the remainder of the roll to the higher Hit Dice creatures by consulting the following table.

Creatures’ Hit Dice      Conversion Factor (CF)
Under 2 1
2 to 4 2
4+1 to 6+3 10
6+4 to 8+3 20

In other words, for the 4d20 roll subtract the number of creatures of less than 2 Hit Dice (these creatures die). If there are any remaining points from the 4d20 roll, subtract 2 for each creature of 2 to 4 Hit Dice (these creatures also die). If this still doesn’t use up all the 4d20 roll, subtract 10 for each creature of 4+1 to 6+3 Hit Dice, and so on. Stop when all the creatures are dead, all the 4d20 roll is used up, or the remainder is less than half the CF of any remaining creatures. (If the remainder is one-half or more of the CF of a creature, that creature dies.) For example, a mixed group of 20 goblins, eight gnolls, and four ogres, led by a hill giant, are caught in the area of a death spell. The 4d20 roll gives a total of 53 points; 20 of this eliminates the goblins (20 x 1 CF), 16 kills the gnolls (8 x 2 CF), and the remaining 17 kills two ogres (l0 points to kill one ogre, and the remaining 7 points are enough to kill one more ogre). The other two ogres and the hill giant are unharmed. A death spell does not affect lycanthropes, undead creatures, or creatures from planes other than the Prime Material. The material component of this spell is a crushed black pearl with a minimum value of 1,000 gp.

Death Fog

Range: 30 yards
Components: V, S, M
Duration: 1d4 rds + 1/level
Casting Time: 6
Area of Effect: Two 10 ft cubes/level
Saving Throw: None

The casting of a death fog spell creates an area of solid fog that has the additional property of being highly acidic. The vapors are deadly to living things, so that vegetation exposed to them will die-grass and similar small plants in two rounds, bushes and shrubs in four, small trees in eight, and large trees in 16 rounds. Animal life not immune to acid suffers damage according to the length of time it is exposed to the vapors of a death fog, as follows:

1st round: 1 point
2nd round: 2 points
3rd round: 4 points
4th and each succeeding round:      8 points

The death fog otherwise resembles the 2nd level fog cloud spell: rolling, billowing vapors that can be moved only by a very strong wind. Any creature attempting to move through the death fog progresses at a rate of 1 foot per unit of normal movement rate per round. A gust of wind spell cannot affect it, but a fireball, flame strike, or wall of fire can burn it away in a single round. The material components are a pinch of dried and powdered peas, powdered animal hoof, and strong acid of any sort (including highly distilled vinegar or acid crystals), which must be obtained from an alchemist.