AD&D 2nd Edition

Everything I have for Second Edition

Tag Archives: Material


Darkness, 15’ Radius

Range: 10 yds/level
Components: V, S, M
Duration: 1turn + 1 rd/level
Casting Time: 2
Area of Effect: 15-ft radius
Saving Throw: None

This spell causes total, impenetrable darkness in the area of effect. Infravision is useless. Neither normal nor magical light works unless a light or continual light spell is used. In the former event, the darkness spell is negated by the light spell, and vice versa. The material components of this spell are a bit of bat fur and either a drop of pitch or a piece of coal.

Bind

Range: 30 yds
Components: V, S, M
Duration: 1 rd/level
Casting Time: 2
Area of Effect: 50 ft + 5 ft/level
Saving Throw: None

When this spell is employed, the wizard can command any nonliving rope-like object, including string, yarn, cord, line, rope, or even a cable. The spell affects 50 feet of normal rope (with a 1 inch diameter), plus 5 feet per caster level. This length is reduced by 50% for each half-inch less. The possible commands are Coil (from a neat, coiled stack), Coil & Knot, Loop, Loop & Knot, Tie & Knot, and the reverses of all of the above (Uncoil, etc). One command can be given each round. The rope can only enwrap a creature or an object within 1 foot of it – it does not snake outward – so it must be thrown or hurled near the intended target. Note that the rope itself, and any knots tied in it, are not magical. A typical rope might be AC 6 and take 4 points of slashing damage before breaking. The rope does not inflict damage of any type, but it can be used as a trip line or to entangle a single opponent who fails a saving throw vs. spell.

Wizard Mark

Range: Touch
Components: V, S, M
Duration: Permanent
Casting Time: 1
Area of Effect: Up to 1 sq. ft.
Saving Throw: None

When this spell is cast, the wizard is able to inscribe, visibly or invisibly, his personal rune or mark, as well as up to 6 additional characters of smaller size. A wizard mark spell enables the caster to etch the rune upon stone, metal, or any softer substance without harm to the material upon which the mark is placed. If an invisible mark is made, a detect magic spell will cause it to glow and be visible (though not necessarily understandable). Detect invisibility, true seeing, a gem of seeing, or a robe of eyes will likewise expose an invisible wizard mark. A read magic spell will reveal the maker’s words, if any. The mark cannot be dispelled, but it can be removed by the caster or by an erase spell. If cast on a living being, normal wear gradually causes the mark to fade. The material components for the spell are a pinch of diamond dust (about 100 gp worth) and a pigment or pigments for the coloration of the mark. If the mark is to be invisible, the pigments are still used, but the caster uses a stylus of some sort rather than his finger.

Wall of Fog

Range: 30 yds
Components: V, S, M
Duration: 2d4 rds + 1 rd/level
Casting Time: 1
Area of Effect: 20 ft cube+ 10 ft cube/level
Saving Throw: None

By casting this spell, the wizard creates a billowing wall of misty vapors in any area within the spell range. The wall of fog obscures all sight, normal and infravision, beyond 2 feet. The caster may create less vapor if he wishes. The wall must be a roughly cubic or rectangular mass, at least 10 feet across in its smallest dimension. The misty vapors persist for three or more rounds. Their duration can be halved by a moderate wind, and they can be blown away by a strong wind. The material component is a pinch of split dried peas.

Ventriloquism

Range: 10 yds/level, max 90 yds
Components: V, M
Duration: 4 rds + 1 rd/level
Casting Time: 1
Area of Effect: 1 creature or object
Saving Throw: Neg.

This spell enables the wizard to make his voice – or someone else’s voice – or a similar sound seem to issue from someplace else, such as from another creature, a statue, from behind a door, down a passage, etc. The spellcaster can speak in any language that he knows, or make any sound that he can normally make. With respect to such voices and sounds, anyone rolling a successful saving throw vs. spell with a -2 penalty detects the ruse. If cast in conjunction with other illusions, the DM may rule greater penalties or disallow an independent saving throw against this spell in consideration of its contribution to the total effect of the combined illusion. The material component of this spell is a parchment rolled up into a small cone.

Unseen Servant

Range: 0
Components: V, S, M
Duration: 1 hour + 1 turn/level
Casting Time: 1
Area of Effect: 30 ft radius
Saving Throw: None

The unseen servant is an invisible, mindless, and shapeless force, used to stop and fetch, open unstuck doors, and hold chairs, as well as to clean and mend. It is not strong, but unfailingly obeys the command of the wizard. It can perform only one activity at a time and can move only lightweight items, carrying a maximum of 20 pounds or pushing/pulling 40 pounds across a smooth surface. It can open only normal doors, drawers, lids, etc. The unseen servant cannot fight, nor can it be killed, as it is a force rather than a creature. It can be magically dispelled, or eliminated after receiving 6 points of damage from area-effect spells, breath weapons, or similar attacks. If the caster attempts to send it beyond the allowed radius, the spell ends immediately. The material components of the spell are a piece of string and a bit of wood.

Tenser’s Floating Disc

Range: 20 yds
Components: V, S, M
Duration: 3 turns + 1 turn/level
Casting Time: 1
Area of Effect: Special
Saving Throw: None

With this spell, the caster creates the slightly concave, circular plane of force known as Tenser’s floating disc (after the famed wizard whose greed and ability to locate treasure are well known). The disc is 3 feet in diameter and holds 100 pounds of weight per level of the wizard casting the spell. The disc floats approximately 3 feet above the ground at all times and remains level. It floats along horizontally within its range of 20 yards at the command of the caster, and will accompany him at a movement rate of no more than 6. If unguided, it maintains a constant interval of 6 feet between itself and the wizard. If the spellcaster moves beyond range (by moving faster, by such means as a teleport spell, or by trying to take the disc more than 3 feet from the surface beneath it), or if the spell duration expires, the floating disc winks out of existence, and whatever it was supporting crashes to the surface beneath it. The material component of the spell is a drop of mercury.

Spider Climb

A spider climb spell enables the recipient to climb and travel upon vertical surfaces as well as a giant spider, or even hang upside down from ceilings. Unwilling victims must be touched and are then allowed a saving throw vs. spell to negate the effect. The affected creature must have bare hands and feet in order to climb in this manner, at a movement rate of 6 (3 if at all encumbered). During the course of the spell, the recipient cannot handle objects that weigh less than a dagger (one pound), for such objects stick to his hands and feet. Thus, a wizard will find it virtually impossible to cast spells if under a spider climb spell. Sufficient force can pull the recipient free; the DM can assign a saving throw based on circumstances, the strength of the force and so on. For example, a creature with a Strength of 12 might pull the subject free if the subject fails a saving throw vs. paralyzation (a moderately difficult saving throw). The caster can end the spell effect with a word. The material components of this spell are a drop of bitumen and a live spider, both of which must be eaten by the spell recipient.

Sleep

When a wizard casts a sleep spell, he causes a comatose slumber to come upon one or more creatures (other than undead and certain other creatures specifically excluded from the spell’s effects). All creatures to be affected by the sleep spell must be within 30 feet of each other. The number of creatures that can be affected is a function of Hit Dice or levels. The spell affects 2d4 Hit Dice of monsters. Monsters with 4 +3 Hit Dice (4 Hit Dice plus 3 hit points) or more are unaffected. The center of the area of effect is determined by the spellcaster. The creatures with the least Hit Dice are affected first, and partial effects are ignored. For example, a wizard casts sleep at three kobolds, two gnolls, and an ogre. The roll (2d4) result is 4. All the kobolds and one gnoll are affected (1/2 + 1/2 + 1/2 + 2 = 3 1/2 Hit Dice). Note that the remainder is not enough to affect the last gnoll or the ogre. Slapping or wounding awakens affected creatures but normal noise does not. Awakening requires one entire round. Magically sleeping opponents can be attacked with substantial bonuses (see “Modifiers to the Attack Roll” in Chapter 9: Combat). The material component for this spell is a pinch of fine sand, rose petals, or a live cricket.

Read Magic

By means of a read magic spell, the wizard is able to read magical inscription on objects – books, scrolls, weapons, and the like – that would otherwise be totally unintelligible. (The personal books of the wizard, and works already magically read, are intelligible.) This deciphering does not normally invoke the magic contained in the writing, although it may do so in the case of a cursed scroll. Furthermore, once the spell is cast and the wizard has read the magical inscription, he is thereafter able to read that particular writing without recourse to the use of the read magic spell. The duration of the spell is two rounds per level of experience of the spellcaster; the wizard can read one page or its equivalent per round. The wizard must have a clear crystal or mineral prism, which is not expended, to cast the spell.